Whirlpool of Earth
This chapter provides evidence of existence of aether and aether-´winds´ : geostationary satellites are never ´standing-still´ but oscillate at (more or less flat) eight-shaped tracks, some hundred kilometer or up to ten degree, regular every day. That superfluous motion contradicts common sciences. It´s only to explain by the fact, these satellites are drifting within whirlpool of earth, just like the moon further outside.

The earth-system is a huge disc of aether-vortex where small earth-ball is turning at centre. Near its surface the earth is surrounded by fine aether-vortex-files. However that earthly magnetfield functions different to common understanding.

These facts and some further phenomena are described in details at new chapter   08.17. Whirlpool of Earth. It might be advantageous to print the file   ap0817e.pdf   (28 pages) to grasp this quite new world-view. These texts are easy to study - by following conditions:

Can you actually imagine how forces of attraction could really work? Also e.g. how attraction of moon can produce tides - by three to four days delaying affect? No? So simply forget all you commonly was told about gravity!

Can you imagine how a piece of wood is drifting within a water-vortex? Also if several vortices are embedded? Yes? So you simply will understand what´s going on around the earth and why which celestial bodies are flying through space at their partly strange tracks.

Can you imagine the energy-constant is given within a medium existing by particles? Also one well knows, inevitably must come up loss of (motion-)energy within? No? Thus you should take the mental effort to visualize motion processes within a medium without particles, within the real continuum of gapless aether.

Aether-Model of Atoms
We can not understand reality completely but can only develop some ideas. The Bohr-Atom-Model for example was convincing - nevertheless was insufficient. The Quantum-Theories now explain reality by pure mathematical-abstract constructions - with results and interpretations beyond common logic. If you don´t like this or even you believe, reality should be based on real prozesses - you need about two hours full concentrated.

The new chapters   08.12. Rosette-Tracks at Sphere-Shells   and   08.13. Aether-Model of Atoms   present quite new sight, where even physical basic terms like ´mass´ are explained by totally concrete aether-movements.

I hope you can drive back your pre-knowledge and pre-judice for some time and enjoy following these unusual considerations closely. For download the print-version ap0812e.pdf and ap0813e.pdf will be best.

Something Moving
In 2009 now I am working exclusive for subject of Aether by new part  08. Something Moving. Properties of aether are defined once more precise and possibilities and necessities of its motions are deduced.

Sometimes I criticized astronomy very hard - so now I have to show, how and why e.g. milky-way with its barred-spiralarms is working and how motions within sun-system come up - naturally based on omnipresent aether. At the very moment I work at motion-pattern of sun, later will follow Jupiter, gravity and some more aspects. I hope to finish this complex at end of year with a new volume of my books.

However many readers will be interested in these new chapters, which provisionary are available also by print-file ap08e.pdf.

Torsionfield - Generator
Experiments are known, showing most strange results, e.g. weight-losses of fast rotating masses, with effects even through walls and ceilings. Also some experiments to my proposals (like other researchers) did produce appearances, which no longer are to explain by pure fluid-mechanics. There must have happened an ´interaction with space-energy´.

At new Torsionfield - Generator, air and rotors are moving ´ether-adequate´, so energy of ambient ether affects usable torque - or even generates current directly. Some additional points of view are shown at chapter Summary. Please download these interesting chapters via ap0711e.pdf sowie ap0712e.pdf.

These aspects are smooth transition from fluid-technology of last two years, back to ether-physics. In 2009 I will publish many new chapters concerning ether - and it might be exciting.

Dear readers, best wishes for rest of 2008 and beyond. Many thanks for your commentaries and I welcome future clues.

Re-Design for Schauberger - Repulsine
It´s a real pity, last fifty years no functioning Schauberger-Repulsine was rebuild. Based on experimental experiences I analysed once more motions processes of that conception. Two effects are decisive: accelerating flows by Laval-Nozzles and increasing mass-throughput by influx aside.

A detailed description is available by new chapter Schauberger-Repulsine Redesign and for printout by ap0709e.pdf (172 kB, 7 pages). With that clear design now should finally be possible to make that legendary machine running - even performance will come up only by high revolutions - like at following machine:

Typhoon - Turbine
Any whirlwind demands suction as trigger, e.g. by rising steam. Static pressure of all environment pushes into that suction, resulting accelerated flow at well known spiral inward turning tracks. Likely trigger is easy rebuild by suitable suction-pump.

However these flows must run nearby sound-speed, so at small devices of 10 or 20 cm diameter fast revolutions of about 20000 to 30000 rpm are necessary. Up to now I did not dare to suggest revolutions thus fast because ´hobby-craftsmen´ hardly can build these machines (and professional producers or institutions don´t believe in Free Energy). Now however I described appropriate movement-processes and construction-principles at new chapter Typhoon-Turbine, also available for printout by ap0710e.pdf (220 kB, 9 pages).

´Trigger´ for these workouts was announcement of an Air-Turbine-Engine by Rockwell-Scientific-Research causing quite a stir, see e.g. www.airturbineengine.com. That engine probably works like described by new chapter ´Typhoon-Turbine´. At any case now it´s obvious, research and experiments into that direction should be done, in order to create all-purpose engines - consuming null fuel.

Ram - Engine
Additional chapter once more shows some details concerning backstroke and its pressure wave. That most effective movement principle can be realized by different constructions. A rather simplist design for example is that version of  Ram - Engine.  I am curious when first time that drive is used in vehicles (however that engine naturally is also suitable for stationary energy-supply). Again a print version is available:   ap0708e.pdf   (149 KB, 9 pages).

Backstroke - Centrifuge
As soon as possible drive of cars must become totally autonomous, like Richard Clem did show already decades before. Capacity for work of his engine was demonstrated without any doubts, however unsolved problem still was why it did work. Now finally I got it: decisive effect of his engine was, it did work by principle of Hydraulic Ram.

At new chapter   07.07. Backstroke Centrifuge that conception is described in details. If you want to know already now how engine of your next car functions, you should download print version   ap0707e.pdf   (271 KB, 15 pages). If you got convinced of that conception, please tell it anyone who anyhow is involved in production of engines or cars.

Windtower-Generator
Fluid-technology knows two effects working absolutely certain: lift at curved surfaces and acceleration of flows within nozzles. Both elements put into most simple conception results a turbine with own ´drive-engine´. That new type of autonomous working windpowerplant is described at new chapter   07.06. Windtower - Generator. Download of print-version is available as file   ap0706e.pdf.

Centrifugal-Thrust-Engine
If water rotates within narrow hollow cylinder, mass weights onto wall by tons even at moderate revolutions. If that hollow-cylinder is cone-shaped, thrust-forces towards wide end come up, which are transferred into mechanical torque via turbine-blades. At the other hand, at norrow end of cone exists corresponding strong suction, by which closed water-circuit is organised.

First time enormous centrifugal forces become usable by autonomous and continuous process, respective that conception is logic improvement of known engine of Richard Clem.

That compact and effective engine is described by new chapter   07.05. Centrifugal-Thrust-Engine.   That workout takes seventeen pages because new processes and constructional elements are not quit simple. Best will be to download print version   ap0705e.pdf   - so you already now will know how engine of your next car will work.

Please tell me why that conception should not function - or build that engine and report about success.

Compressed-Air-Car
First news at New Year: oil-price climbs 100 dollar! The answer: engines working by compressed air, also usable for drive of cars - without consuming air-pressure!

New conception of new chapter   07.03. Suction-Cylinder-Engine is compact unit with any performance you like, if compressed air is used as working medium. Download these seven pages of print-version ap0703e.pdf.

1. Experimental Confirmations
Last months were rather exciting as some very engaged and competent men made diverse experiments, some concerning my proposals. Many thanks indeed for these extraordinary idealists!

Many of my pure theoretic claims were confirmed by practical results. Based on these experiences now I know much more concrete what I am talking about. Many components were tested and now it´s absolutely sure, most strong flows are generated by minimum input of power - if exclusively suction-effects are used. For example, I underestimated enormous acceleration by nozzle-effects - which is totally ´for-free´. At the other hand I underestimated negative consequences of centrifugal forces when using water as working medium.

Complete autonomous working machines not yet are available, however progresses are rather positive. Occasionally I will report about.

2. Zero-Litre-House
All kinds so suction-pumps are effective, however it´s difficult to build corresponding constructions of turbines. Often one still keeps on ´pressure-thinking´ while also turbines can generate Free Energy exclusively by suction-effects. An answer to that problem is shown at new chapter   07.01. Cellar-Windmill   where static pressure at suction-surfaces is reduced by sideward drawing off air. That windmill fits into any cellar and its performance is sufficient for power-supply of house. Please download print-version ap0701e.pdf (199 KB, 16 pages) of that conception on your computer!

Also that machine is yet not completely build - however everyone is invited to build that unit by himself. Optimum construction most soon is only achieved when many people same time approve that technique. However be cautious: not only once constructional elements did fly around previous men and 2-mm-steel-sheets got damaged - not based on centrifugal forces or mechanical pressures but by suction-effects, i.e. by immense forces of normal molecular movement.

3. Suction-Windmill
One year ago I described   Suction-Windmill   however merely one was interested in. At that time I was not able to make practical calculations (and no professional did ever want to calculate Perpetuum Mobile), however now with fitting mode of calculations at previous Cellar-Windmill, everyone can check by himself which parameters will do for his power-supply by that home-windmill. If acceleration by flows through nozzles is integrated, that simple machine is much smaller and more effective than described at mentioned chapter.

4. Zero-Litre-Car
Like mentioned upside, if using liquids as working medium strong centrifugal forces might come up which must be considered at organisation of circuits. By new chapter   Meander-Wheel-Engine   good idea for solution is shown. That conception is usable for drive of vehicles and will replace common combustion-engines. Please download print-version ap0702e.pdf (131 KB, 8 pages)!

5. Invitation
Phase of empty phrases is gone. While last ten years, by sure also nonsense got published at my website (like anywhere), however workouts of last time most prevailingly are really good. It would make sense if now qualified people and especially mid-range companies would check honestly my proposals.

Just that ´Meander-Engine´ shows most effective principle of operation - however by that shape still is far away from optimum. Please send me proposals for improvements, which I would like to publish here (if not across-the-board). At the very moment I am preparing one next version and probably can offer for discussion at February. As these quite new shapes are rather difficult to imagine, 3D-views would be fine, however I have no software nor time for. Many thanks in advance.

I hope you find interesting points of view at these new pages - and again I ask for critics. Thanks.

2006-09-30
New part 04. Exclusion and Inclusion´ of my Ether-Physics is ready (will be first part of second volume of book). These chapters concern relativity- and quant-theories - and insight, ether steady is in plasma-state. Good answers I fount to light-ether and -speed - and I found most interesting workouts of Harald Maurer, The Principle of Existence, worth to read by guarantee!

2006-06-06
Bruce DePalma documented by his Spinning-Ball-Experiments, rotating bodies fly faster and higher - and again fall down faster - than not-rotating comparable bodies, without any doubt. This effect is usable if circle-processes are organized.
New section Energy by Gravity-Forces describes basic principles of these ´Bessler-Wheels´ in details. Handcrafts are asked to check these new ideas and to construct modells - and profis should be clever and produce really working gravity-motors!

2006-01-20
Dr. Daudrich describes processes within tropical whirlwinds exactly, e.g. also why they are conflicting Second Law of Thermodynamics. I added some aspects, e.g. Energy-Filter of flows with different speeds. Chapter Whirlwind and Vortex-Powerstation thus is of generally important - and these powerstations must be constructed now!

2005-08-08
First three parts of Ether-Physics now are also available as Book with color pictures.
Comprehensive texts thus are easier to study.

This book will be classic edition for new understanding of physics like spiritual subjects - wanna bet?

2005-07-07
Discussions concerning Clem-Motor and Mazenauer-Motor and commonly mentioned assumptions concerning source of energy-surplus animated me to write comprehensive new chapter Auto-Motor - Autonomous working Suction-Turbine.

I worked out decisive effect for usage of Free Energy by fluids and made design of solution exactely fitting, so Schauberger´s old idea of suction-turbine now finally will become reality.

Detailed descriptions resulted long chapter, so it will make sense to download corresponding file eft609e.pdf and to make printouts (330 KB, 13 pages). Hope you like reading - and constructing this ultimative Perpetuum Mobile.

2005-03-31
Nobody is interested in mechanics, so concerning ´Bedini-Fever´ (see below) I did try to analyse electronic by my understanding of ether. Resulting of is comprehensive chapter Ether-Energy-Generator. Please read summery first, then download total chapter (some 18 pages printout). Discussed processes and constructional elements are most important - as you will see!

2005-02-28
Since 2000 came up some ´Bedini-Fever´, e.g. cause ten years old girl reconstructed one of his designs and clear surplus of energy was achieved for five days. Bedini´s actual aim however is constructing ´solid-state-solutions´, in order to achieve electic supply without mechanical motions.

Many other researchers constructed machines also with combination of Motor-Flywheel-Generator. I did explore function of flywheel and made design of specially shaped ´fly-beam´. This mechanic will be essentially better solution, e.g. in comparison with Don-Martin-Generator.

2004-12-12
Last months I made lots of workouts concerning gravity machines - some ´unwillingly´. For relaxation I studied third part of ´Textbook Remote Viewing by Manfred Jelinski (available only in German). Once more he pointed out unbelievable direct contact of our subconscious to ´matrix´- just what I would like do detail by my oppinions of ether. Also interesting are his reports about ´solo-viewers´ - and even popular game of ´orders at universe´.

My friend Reiner Höhndorf has very special relation towards ´other side´, e.g. recommending some times to tell one´s gardian angle ´damned, I work hard day and night, now it´s up to you to ... please! - Thanks!´. I also have some relation to ´friends over there´ and can ´catch ideas´ as I (they?) like it. Some ideas are rather good - some times however friends obviously like to make me ´barking up wrong trees´, just for learning!

So I made up mixture of solo-RV and ´damned ... please! Thanks!´ - and result is described at chapter Spring-Drive-Motor: spring becomes maximum tensioned by gravity plus inertia at end of downward motion of mass. Already at the beginning of upward phase, mass shows much weaker resulting forces. So spring is able to pull inward mass and same time pulling system ahead (by force = counteracting force).

Most simple solution, quite new aspect - or Bessler´s age-old trick? He used other construction than design I recommend, however many hints of eye-wittnesses (´before starting system, he tensioned some spings´ - while Bessler himself played down importance of springs) like sights of remote-viewers correspond to motion´s process.

So I hope definitively to wind up subject of gravity-machines - however not some handcrafts until that view of usage of gravity is approved ... please, thanks! Next year I intend to describe occurrence of gravity by my view of ether.

I express thanks to all readers and their patience even when I was ´barking up some wrong trees´. I wish you all to come along with your projects and wishes.

---

2004-11-11 I got exceptional many replies to chapter Mechanic Gravity-Motor. Long times I was busy with checking results and lots of other proposals, especially concerning problem of impulse transfer of kinetic energy of free falling mass to opposite masses. I only want to publish one of many conciderations about this problem as an example. At this Pendulum-Wheel-Motor effective mass keeps turning all times, even forces are transferred by impulse into turning momentum.

---

2004-10-10 Periodical New Energy Technologies is published by Alexander Frolov of Faraday Lab, St. Petersburg (see External Links), reporting about Free-Energy-experiments. There are offered real working overunity-devices resp. investors are wanted for production in other countries. It´s great honour for me, Alexander Frolov published an article also about my workouts.

I have no technical facilities and can´t serve with further details. I only can publish these ideas and consideration for free and anyone can use it just one likes.

This machine is easy to build and thus I do hope, craftsmen take challenge and small- or medium-sized businesses soon offer modular assembly system for do-it-yourselvers.

Naturally I would like to report here about progresses and also when and where such systems are offered.

Now at new third part Local Ether-Movement is descirbed, which other kind of movement´s pattern exist within local limited areas (Bounded Ether, Potential-Vortex-Cloud). There is only one ether and there is only one shape in principle for motion possibilities of all occurrences, visible e.g. as galaxies and sun-systems or e.g. like electrons or radiations work.

This Potential-Vortex-Cloud is quite new shape of vortices and consequences of these insights are rather compelling.

This new part is large (printed some 71 pages), so it will make sense to use available Downloads as zip- and pdf-files (also actual CD is available for 5 Euro cash by normal post).

Collegue Ami made impressive Animations to Universal Ethermovements, which are inserted as appendix of second part (rather large files, also available as downloads).

I´ll go on with further chapters and parts and try to explain further physical phenomena based at these Potential-Vortex-Clouds. I hope readers enjoy reading and will find interesting points of view for own considerations concerning these problems.

So overview of my website should be easier for new readers, old readers could be remembered to subjects for further development by themselves. There is also short summary of actual status of my Ether-Theory. These new chapters are also available as download.

For me, this summary of present workouts marks certain caesura. Some eight years I concentrated at ´Free Energy´, now I´ll focus strictly at subject of ether. That´s great challenge - however some eight years later, I hope one will ´view world some different kind´. Next section of ether-workouts with essential aspects I´ll publish within few weeks.

To end of year I want to express thanks for large interest of many readers of my website, especially for lots of useful hints. Next year I want to publish further parts of Ether-Physics - however not thus fast I produced sites during last years.

There is concrete hope, 2004 will bring essential progress by developement of engines for using Free Energy - so at least one basis of ´global madness´ is dropped.

Best wishes for 2004.

2003-05-01
Elektric - Dynamo
There is a congress ´Decentral Energysystems´, 16. / 18. May at Breisach / Germany with lectures to diverse subjects (see German homepage, External Links, NET-Journal). There I´ll also lecture on Electric - Dynamo with that text and these pictures - a brief version of Electrostatic-Electrictiygenerator (so probably easier to read).

At German part of my homepage is included also new chapter about Elektrostatische Feld-Generatoren, talking about William W. Hyde who made similar machines (and you will find English websites a lot about Hyde).

2003-03-28
Ether-Physics and -Philosophy - Second Part
At this second part is described Universal Ether-Movement with its order-functions (analogue to experiences of Global-Scaling-Theory). Above this it got clear, Quarks & Co are no particles but sections of this background-movements of ether.

Structure of Ether-Physics and -Philosophy is redesigned and lots of mistakes are eliminated. As download are available zip-files (for study offline this workout) and pdf-files (optimized for print-outs).

However, I was happy to get confirmation to one of my assertions: turbines are to drive very effective by backstroke. Whole story is documented at new chapter Resonance-Turbines in details - for me totally clear effects and perfect PM.

Thanks for many hints this year. I hope, readers will find interesting news at my website also next year. For example, some new chapters of new Ether-Theory are on the way, probably January ready for reporting.

I wish readers all the best, for rest of this year and beyond.

2002-11-07
Congress, Crosswheel, PM 4. Kind
End of October, Congress in Bensheim was organized concerning Free Energy, interesting for all participants. Here I report, very personal, about some of referats.

Based on hint of collegue, I designed mechanical model of ´free flying wheel´. This Crosswheel-Motor is a rather effective machine, simply to construct, besides that strange gear.

I believed, by PM 3. Kind all possibilities for earning free energy were described. Not correct, I hat to formulate Perpetuum Mobile of Fourth Kind - now finally, these ´natural laws´ are valid generally.

By Ringwheel-Motor now also to pictures with three rings estonishing solution is achieved. By excentrically guides rings, tangential inertia is usable - as sure as broken car-wheel overtakes car.

At these chapters are also some remarks far above technical problems. So finally I end contributions concerning rotor systems, cause problem is solved, others might pick up ideas and produce real Free Energy by principles presented here.

2002-09-30
Rhönrad-Motor, Moon-Motor and Tide-Energy-Station
Many readers appreciate to follow my strange ideas. Now, as summer got an end, I can offer three more chapters within section of Appendix to Perpetuum Mobile.

Just for fun, Merry-go-round talks about forces effects within an exceptional carousel.

That lend to studies about movements processes much more elegant, at gymnastic apperatus of Rhönrad. Masses there are shifted by muscle power, however, couldn´t this be done by mechanical automatism? By this Rhönrad-Motor quit new aspects of acceleration and deceleration of masses at excentric tracks did result.
This movements principle, Bessler well could have used too, at least at one of his diverse models. Strange enough, rise and fall of weights won´t matter. Even more adaequat, there is build a mechanical copy of a water-wheel, where waters fall ahead of turning in general.

´Water-Wheel´ rather same kind is high tide running around earth, driven by moon. Also that earth-moon-system is to rebuild by mechanical model. Within space, there is no fix point - otherwise one could ´lift earth out of its hinges´. Constructing Moon-Motors however, one well can place that ´peg´ into machines.
Shiftable mass (like water at high tide) are essential, also forces effects at slope (like at inclined coast or turbine vanes). So Tide-Energy-Station could be rather important, cause to install within each washhouse.

In addition, I am looking forward to Dr.Fiedler´s presentation of his version of Bessler-Wheel (at a congress in Germany, see NET-Journal - Kongress, only in German language). I´ll report here.

2002-07-17
Sunwheel-Motor now with Crank-Disc-Gear
In addition to Sunwheel-Motor now demanded Crank-Shaft-Gear is described by excentric disc-elements, so this engine is to construct easy and most effective.

2002-06-29
Sunwheel-Motor and PM of Thrid Kind
I got many response on last chapters and some colleagues work at similar projects. So a new section Appendix Perpetuum Mobile is opened.

At first, there I present Sun-Wheel-Motor, a pure mechanically working PM with pulsating masses but constant speed and turning momentum at output. Remarkable at this engine is, it only produces momentum if charged with workload at output.

Deduced general principles by short chapter PM of Third Kind is important for engines using Free Energy of diverse kind.

2002-05-15
Problem solved - Gates are opened
By analyses concerning Bessler-Wheel last two years, I succeeded to put focus to this historic documented Perpetuum Mobile. Convinced by experiences of Remote-Viewing, it seemed essential for me, ´morphic field´ of this subject is feed-up by ideas of many people, so it´s only question when an ´artist´ will read-out right answer.

I could see this developement by number and content of emails and I have to thank for lots of hints. If however some inventors want to make patent applications, sometimes I am hindered to publish all my workouts in time (while I believe Free Energy must be free available for everyone.

So this spring I had time to construct models by myself. Sceptics will have fun, naturally these models didn´t run, much too bad constructed. Nevertheless, positive readers at new chapters Bessler and Swivel-Arm-Wheel and Pendulum Wheel will find usefull ideas and hints for own conciderations.

Finally in April, Georg Künstler did publish his patent application at his website (see External Links). He will concentrate at realization of his machine, so now I am allowed to describe theoretic background of solution. In brief: this man did combine decisive elements in genius manner, so Bessler-Problem is solved with one convincing version (of lots of possible versions).

At chapter Implulse-Principle und Centripetalpowerspider, universal importance of concept of ´braking-out´ energy (like some explorer and inventor already did, at least partly) is worked out, e.g. using only inertia forces, and design of corresponding engine is shown.

At chapter Impulse-Engines an extraordinary compact Swing-Ring-Motor is presented (final version of crop-circle machines). Two more applications of Impulse-Principle are mentioned, one using Permanentmagnets, the other using water, thus an Impulsine (according to Schauberger´s visions).

By chapter Consequences, I will close subject of matter rotor-systems, as now there are other men with other qualifications asked for further developement of theses systems. So I am free to put my focus at basics of all movements: the only really existing matter - ether.

2002-04-27
Ripening period
Spring 2002 I couldn´t bring new pages. This won´t tell, there are no new results. However, most of these facts will probably be ready for publishing end of May.

2002-01-02
Edge-Pipe-Turbine
Principle of interrupted redirection of fluids already was used at the ´Repulsine´, here once more described at new chapter Schauberger and Edge-Ring-Turbines. There is one very effective version of waterpower-turbine with an edged pipe. An other version uses centrifugal forces for lifting fluids, probably could run automatically.

Transfering this principle of movement to direct usage of ether is hard stuff, so workouts to these aspects of ether-movement will take some more weeks.

PS: best wishes to everybody reading this website. Like all friends of Free Energy I hope, 2002 anyone anywhere anyhow will achieve breakthrough.

Fact glaimed within last months was: given inertia plus pressure from aside must result stronger forces, based on even ´passive´ counter-pressures. Same effect is valid at Don Martin´s old motorbike-tyre, see new chapter Don Martin and Edge-Ring-Generator.

By conciderations to relation of forces at rigid wheel, now by strict logic there must result differences of energy-input and -output, when effective masses at rotorsystems are guided elastically.

These points of view will be transfered to some Schauberger-designs (end of 2001) and this principle of movements can be used by arrangements of permanent-magnets (early 2002). That´s question of ether-movements - and so I do hope to come back and to finish that essential subject spring 2002.

2001-10-20
Acceleration at bended tracks, Planet-Wheel-Motor and Crop-Circle-Motor
Sorry, it took some weeks - but now I finished subject of rotorsystems - with surpricing and satisfactory results. From new analysis of crop-circle picture did arise:

if a ring-shaped rotor rolls alongside spiralic track, inertia of its mass-points show different values and directions. Counter-pressure of supporting point affect at lever arms, so angles speed is accelerated. Contribution of wall will bring surplus of energy. Diverse effects of that kind of movement are discussed in details at new chapter Wheels at Tracks moved.

Crop circle picture does only show a gear. In simple version it can also be used within rotor-systems, e.g. analog to Würth´s ´Pump-Machines´. That ´sickle-gear´ is a multi-sectional chain, where joints include on the other. Rotor is guided ´elastically´ and is free to achieve effects above. On the other hand surplus of pressing or pulling forces are transmitted onto a crank-shaft. These constructional disigns are described at new chapter Planet-Wheel-Motor and Crop-Circle-Motor.

These chapters probably will determine my workouts concerning rotor systems. Now theoreticans are asked, honestly to check these conciderations and claims about that old Bessler-principle and this new principle of acceleration at bended tracks, to translate these facts into technical language and to approve these techniques. On the other hand, practicans and companies are asked to construct models and products for Free Energy.

I kindly ask for criticism and reports about further developements. Next months I hope to finish also Ether-Continuum-Theory by workouts of same quality.

2001-09-06
Gravity / Inertia - Rotation-Motor
Variations of Swing-Circuit-Motor now are descibed by new chapters:
Gravity-Centrifugal-Power-Motor, by which a multistage suspension is used resp. bended spokes will achieve special effects.
Centrifugal-Power-Rotation-Motor, at which gravity is replaced by intertia.
Based on new understandings, now finally optimum version of crop-circle motor can be worked out until end of September.

2001-08-28
Swing-Circuit-Motor SCM
A new chapter Swing-Circuit-Motor SCM does show basic design for building-up mechanical oscillations. Some more variations of motors will be published next month.

2001-08-08
New chapters about Mechanical Oszillator and Bessler-Principle
Two new chapters are inserted: Mechanical oszillating circiut shows basic principles of turning-up a swing - and its application to Bessler-Wheel, Sling and Double-Sling reminds at previous designs and its understanding as starting points for working out essential elements of Bessler-Principles.

2001-07-20
New chapter about Remote Viewing Session
Now here is added that chapter Remote Viewing, where first sessions about Bessler Wheel are presented.

2001-07-03
Remote-Viewing / Ether-Theory
There is a new external Link pointing to subject of Remote-viewing, which brought important additional knowledges about Bessler-Wheel. That homepage is in German, but you will find websites concerning remote-viewing also in English.

A new section Perpeduum Mobile is installed, where at first there is a new chapter Essentials. Implications of ether, not only concerning material occurances but also spiritual aspects there are discussed. It will take some weeks, before highly interesting chapters will follow.

2001-05-30
Schauberger- / Vortice-Machines
Sorry, steady visitors: I had to do too much other stuff, so this month I can not publish announced chapters of ether-theory nore rotor-systems. Nevertheless, I got many good hints for further workouts.

Instead of this, Mathew Whitney did present a quite new Schauberger-Maschine and Evgueni Sorokodoum offers a very good page concerning aspects of Vortices. Both links you will find at page External Links upside.

2001-04-28
Ether-Continuum-Theory
This subject got large enough to build a new section Ether-Continuum-Theory. New chapters there are Preliminary and Concluding Remarks and also Local Ether-Movements. End of May chapter Floating Ether-Movements will be added. Afterwards, here new rotor-systems will be presented.

2001-03-30
Universal Ether Motions
By a new chapter to ether-theory Universal Ether-Motions are discussed, so which kind of vibrations ether could show within whole universe - with astonishing results (at least for me). To the end of April an other chapter Local Ether-Motions will follow, discussing patterns of motions, which could probably be material particles or physical forces.

2001-02-24
Pulsating motions in fluid and ether
Already first application of Ether-Theory does show remarkable results. Effect of well known hydrodynamic ram can be used for turning momentum, as described by a Backstroke-Turbine. Pulsating movements at Schaubergeres Repulsine did effect acceleration, as discussed by a Pulsation-Turbine. Even better understanding of levitation-effects now is possible. These conciderations you will find at new chapters of Appendix to Fluid-Theory.

2001-01-20
Ether will relate to materia like water to ice
Conciderations of my Ether - Theory probalby could help better understanding some basic problems of physics. Please read and comment.

2000-11-10
At Appendix to Rotor-Technology now are added researches about Bessler-Wheel, thus a combination of Inertia- and Gravity-Power at Wheels. Resulting of, quit new aspects to rotor-technology as a whole will be.

2000-10-13
Once more, I did analyse pictures of Schaubergers Home-Power-Station. So I installed an additioal chapter Appendix to Fluid-Technology. There a new concept of a Pneumatic-/Water-Turbine is presented. Analog to a permanent magnet this maschine will show a Permanent-Pump.

A congress at Zürich, concerning Free Energy, was very impressive and it will take time to workout all aspects. A report of my Flop and Success will show a summary of this event.

2000-09-06
A new page ist installed, showing Theoretic Problems of Ball-Experiment etc. in condensed shape. There are lots of questions of basic importance, we need answers for optimizing models. Physicists and specialists are asked for help.

2000-07-15
Finally I got managed to translate all pages of rotor-technology into English, layman-like, please excuse my poor knowledge of English language. Nevertheless you well may see, contents of these pages are important. Best you will start reading Introduction to overview structure and general content of these pages.

At the moment, some frieds are constructing this Centrifugal-power-spider, so we soon may know whether my theories are right or wrong. At any case, at September in Zürich, I will lecture about and we will demonstrate this maschine.

Some weeks ago, Felix Würth did show a maschine analog to my Excenter-Noppen-Getriebe, which did run remarkably. So there is cause for hope, engines will rund soon.

2000-02-25
Now, there are some more pages concerning Crop circle (Kornkreisbild). Especially you should have a look at Dreifach-Kurbel-Konzeption (three pendulums representing the basic principle of movements) and Exzenter-Ring-Maschine (realizing that catapult-effect by simply three excentric rings), both also shown by animation.

As soon I got through that problem, I will translate these chapters into English.

There are new texts and figures concerning wind-engines (Windkraftanlagen), especially to the Fish-concept (Kleine Windkraftanlage).

There is also a new chapter Würth-Schwung-Scheiben, systems of ´fly-wheels´ which do show over-unit-effects. I made some papers and figures about reasons of these effects, also proposals for improving these systems (available as downloads).

A new script does show Reasons for over-unit (Ursache des Überschusses), why starting and stopping of these systems will demand/give different amount of energy.

Included there are some studies about David´s catapult (Schleuder-Effekt) and how forces will work within Addition of forces (Adddition der Kräfte).

Lastly but essential are studies to a Crop circle (Kornkreisbild), which now we analyse and will test in diverse versions. A highly interesting aspect for improving these fly-wheel-systems.

Sorry, I got no time to translate that whole stuff. Perhaps you may use a translation program in order to understand the essentials.

1999-09-30
In Juli 1999, I did some lectures at PKS, Schaubergers home in Austria, and by this, circle is close concerning my investigations about fluid technology.

Since I started with my books to Evert-Fluid-Technology two years ago, more than 300 books were delivered, much more additional papers. Some 500 people listen to my lectures or did discuss with me about that problem. Some engaged friends did help to spread these ideas.

However, it must be acknowledged up to now, no decisive progress could be achieved. Well, some handicrafts try to aprove some models. Decision-makers in buisiness or institutes however, could not be motivated to prove honestly these ideas.

So, I could just through this stone into waters, whether the waves will reach fertile coasts, that´s uncertain. Quite certain, Schauberges statements not at all are easy to understand. Nevertheless, he didn´t tell stupid stuff. At PKS, some of his ideas are verified indeed.

I just tried to make some aspects of Schaubergers statements more clear, by theorectical conciderations and by designing constructive elements as well. Many of my ideas might be wrong or irrealistic, but as sure will be, some of these ideas are good, will have enormous effects. Only some few of shall be remembered here:

Lots of energy is wasted by transport of fluid within any kind of pipelines. By twisted flux within a pipe, friction will work in positive sence, so fluid can be transported with less energy and pipes will stay clean. Thus, it would be very sencefull to produce Twisted pipes, cause after each bend flux will not be turbulent but flux will be accelerated and better structured - like blood in arteries.

Pumps are constructed in many variations. However, that Potential twist pump does show special design: centrifugal channals within a rotor are open to both sides, one of will build the housing, the other will be build by an ´excellerator-rotor´, turning double speed of rotor. Thus, within the channals not only a centrifugal flux will exist, but also a twist, the more outside the stronger. It would be worth to approve that predicted effect: within these channals enormous suction will exist, as sure as tornados do their work. This concept does correspond to that version of Schaubergers ´home-power-station´ he keeped secret, cause ´it was as simple, every plumper could construct it´. Schauberger frequently use pairs of waved discs - and not at all of his drawings both did rotate. I also think, that ´Messiasmaschine´ was build like double- or threefold-bowles - immagine, that pump above constructed with 10 m radius, what would go on within these channels!

I still don´t know, whether or why not, that principle of Rotation stroke piston is used. That rotary mashine does show optimal movements, can be used as pump and turbine as well, could be effective in many applications.

There are dozen of theories concerning lift, a wonder airplains do fly. My theory doesn´t show more senceless than others: only by suction that normally chaotic movements of molecules are ordered resp. structured, by their ultrasound-speed the given flux will be accelerated decisively, with following well known effects. So it´s impossible, these Jet wings wouldn´t be more effective than common ones, these Fuselage wings should not be build. It´s up to anyone to transform these aspects to helicopters, using these principles instead of roaring rotor blades.

By all known laws of flux-theories, at the ´tail´ of this Buoyancy body must exist more kinetic energy than originally is available. Theoreticans will tear one´s hairs, about statements like this - laymens about numberless ´phenomena´ within every phyics-book, contradictionary to all theories. At the tail of that fish, indeed, not more energy will exist than within the fluid around. However, molecules there won´t dance chaotically, but will fly mostly same direction, in a well structured flux of high density, self-accelerating like tornados. So that kinetic energy of that twisted flux may be used, for example by that ´Fish-wind-power-station´ resp. this ´additional´ energy can be used in diverse manner and medias.

Within my Potential ring vortex device also ´more wind´ or more water-flux will be produced. This concept was developed as a Ring vortex tank , which will allow to make water ´alife´. However, that mashine, probably might go on turning by its own - like an atom, cause it´s like a model of: a potential twist vortex included within a ring vortex. Some energy is put in (by a small pump at the end of hyperbolic inlet) in order to start the potential twist vortex, which automatically will accelerate bypass-flux. Both together is directed towards outside, thus on a larger arm more torque is available. Whole pressure of that flux is transformed to mechanical rotation by special ´pressure blades´ (they have no backside, so no redirection by suction may occure). By the ring vortex, masses in motion will hit more than once to these blades. So additional usage of original energy-input will be possible. Impossible? Well, impossible like every single atom - based on physical theories.

Common theories don´t allow, something will move by it´s own - but at nature, all times everywhere, for example molecules will move ´by its own´. There is a man named Felix Würth, who is able for example, to gain more energy by negative acceleration than he neads to accelerate most simple rotary mashines. I would like, for example, someone would construct that Excenter-nopp-engine - or at least would simulate by computer, how power of gravitation will work here. By these wheels with variing radius, a masse will fly outwards, once more accelerated by gravitation falling downwards. That motions direction now is blocked resp. redirected by that nose. So the system at a whole will be accelerated (instead of being braked down when masses have to move centripedal). Think it over. It´s quite impossible - if Felix Würth (and others) would not be able by simple mechanical systems to ´gain´ some energy.

At the moment, I try to solve the problem of that Crop Circle Picture. It seems to me a worthfull mashine. Practically it´s a multisectional pendulum, all axis included one within the other. Masses are moved at spiral tracks, turning outwards and inwards. Centrifugal forces partly may sway out. Acceleration towards the center, however, is not done by spokes like in stable wheels. The effect will be like that, bike-racers try to accelerate speed at six-days-race: up- and downwards at the curves. However here, the boddom probably will move too. Some month later, I hope, I ´got the curve´ and may report here. Might be, someone will help me, for example by calculations about speeds and forces within that system.

All this are simple movements of mechanical or liquide masses, no callenge to hightec. There for example, they make a mess with DNS, however that´s but ´hardware´, while ´live´ totally some other will be, for example will be more a question of movements.

You move wrong way !´ Schaubergers well-known statement was. In nature, there exists no circle nore straight line, all motions will follow in- or outturning spiral tracks. What other fact we need to know, until we finally will start to move masses ´right´ way. There must be lots of men with well founded physical knowledges (I don´t have), who could bring ahead my laymans ideas and attempts that way. More than this ´suction´ and hints I can not contribute.